Finally got around to building this regulator. Fully leak tested and working. Comes with a guarantee.
SPECS
-New 3" brass CGA 320 superior products inlet
-412 Dual Stage Concoa Regulator (will work with any diffuser on the market)
-6011 A Brass Burkert solenoid (already wired)
-2 Brass Fabco NV-55-18 needle valves (reliable and functional for our use. no problem achieving the bubble count you want)
-10' of co2 proof 1/4 od tubing and glass inline bubble counter included
ADD ONS
I can integrate check valves into the post body for an additional 20 dollars each. The post body after the solenoid has only been dry fitted together and is open to further customization.
Price: 360 shipped
_____________________________________________________
CO2 Parts
Matching chrome/SS gauges
Matching gauges are quite hard to source and costly. Finding the right individual gauges on ebay takes a lot of time and averages atleast 15 dollars + shipping.
These pairs have been taken from scrap regulators and are VERY GOOD condition with clear gauge covers. They are tested and working.
Each pair are 33 dollars shipped.
[strike]Pair 1[/strike] SOLD
front
back
[strike]Pair 2[/strike] SOLD
front
back
[strike]Pair 3 (same condition of pair 2 but higher lpg range)[/strike]SOLD
_____
[strike]***1 set of Superior Products Chromed CGA 320 inlet[/strike]SOLD
comes with nipple, nut, and washer. 23 dollars shipped (I only have one left, cheapest deal you'll find shipped)
***200 micron filters for CGA 320 nipples. This is for people who use steel co2 tanks, prevents anything from screwing up your regulator. 2 dollars each.
***Used and quite dirty brass CGA 320 nut but usuable if you want to clean it or don't care. Works with any cga 320 or 326 nipple. 3 dollars with any order or 5 dollars shipped.
***Stainless Steel Relief valve. 6 dollars shipped, 4 dollars added on to another order
______________________________
Plant Package
4 Stems of Rotala Macrandra Green
4 Stems of Rotala Singapore
2 stems of Hygrophila Lancea
20 nodes of DHG (E. Parvula)
13 dollars shipped.
general snail warning.
SPECS
-New 3" brass CGA 320 superior products inlet
-412 Dual Stage Concoa Regulator (will work with any diffuser on the market)
-6011 A Brass Burkert solenoid (already wired)
-2 Brass Fabco NV-55-18 needle valves (reliable and functional for our use. no problem achieving the bubble count you want)
-10' of co2 proof 1/4 od tubing and glass inline bubble counter included
ADD ONS
I can integrate check valves into the post body for an additional 20 dollars each. The post body after the solenoid has only been dry fitted together and is open to further customization.
Price: 360 shipped
_____________________________________________________
CO2 Parts
Matching chrome/SS gauges
Matching gauges are quite hard to source and costly. Finding the right individual gauges on ebay takes a lot of time and averages atleast 15 dollars + shipping.
These pairs have been taken from scrap regulators and are VERY GOOD condition with clear gauge covers. They are tested and working.
Each pair are 33 dollars shipped.
[strike]Pair 1[/strike] SOLD
front
back
[strike]Pair 2[/strike] SOLD
front
back
[strike]Pair 3 (same condition of pair 2 but higher lpg range)[/strike]SOLD
_____
[strike]***1 set of Superior Products Chromed CGA 320 inlet[/strike]SOLD
comes with nipple, nut, and washer. 23 dollars shipped (I only have one left, cheapest deal you'll find shipped)
***200 micron filters for CGA 320 nipples. This is for people who use steel co2 tanks, prevents anything from screwing up your regulator. 2 dollars each.
***Used and quite dirty brass CGA 320 nut but usuable if you want to clean it or don't care. Works with any cga 320 or 326 nipple. 3 dollars with any order or 5 dollars shipped.
***Stainless Steel Relief valve. 6 dollars shipped, 4 dollars added on to another order
______________________________
Plant Package
4 Stems of Rotala Macrandra Green
4 Stems of Rotala Singapore
2 stems of Hygrophila Lancea
20 nodes of DHG (E. Parvula)
13 dollars shipped.
general snail warning.
Last edited by a moderator: